欢迎您进入杭州开享智能科技有限公司

杭州杭州开享智能科技有限公司

全国统一咨询热线:15858162482
新闻资讯
公司动态
行业资讯
您的位置:首页 >> 新闻资讯 >> 行业资讯 >> 浏览文章
返回列表
液晶拼接屏安装使用应该避开哪些认识上误区
发表时间: 2015年08月02日   来源:互联网 点击:
来源:互联网 点击:

  科技的快速发展,越来越多的黑科技产品出现在人们身边,会议室液晶拼接屏凭借着它的强大的功能以及高端大气的外观被越来越多的企业采用,但很多企业购买了液晶拼接屏后在使用过程中总会出现一些问题,这就可能是由于在使用过程中没有规避一些误区所导致的,今天拼接屏厂家麦骏科技带大家一起探讨液晶拼接屏在采购过程中所要注意的几个误区:

The rapid development of science and technology, more and more black technology products appear in the people's side, meeting room liquid crystal splicing screen with its powerful function and the appearance of the high-end atmosphere to be used more and more enterprises, but many companies buy the LCD splicing screen after there is always some problems in use process, this may be due to in use process did not avoid some pitfalls that lead to the splicing screen manufacturers MaiJun technology today with everybody together discuss LCD splicing screen in the purchase should pay attention to in the course of a few misconceptions

  液晶拼接屏的亮度越高越好

  液晶拼接屏的亮度是根据实际使用环境来定的,不要盲目的追求高亮度,室内一般用500cd/m²就行了,有阳光照射的室内,可以考虑用700cd/m²的,因为亮度越高,造价越高。

The brightness of LCD splice screen is as high as possible


The brightness of liquid crystal splice screen is decided according to actual use environment, do not blindly pursue high brightness, indoor general use 500cd/m ^ 2 line, have sunshine indoor, can consider to use 700cd/m ^ 2, because the brightness is higher, the cost is higher.

液晶拼接屏安装使用应该避开哪些认识上误区

  液晶拼接屏没有色差

  55寸液晶拼接屏在使用一段时间后会出现颜色衰减,即色差,影响使用效果。那么,很多人的理解是液晶拼接屏比较高端,不会出现色差。事实上,液晶拼接屏在使用一段时间后同样会出现颜色衰减,而且,这种衰减是不可逆的,不过,它的衰减并不会经常发生,一般液晶拼接屏厂家在设备出厂前会用技术手段调试好色差,可以使一套拼接屏的色差基本一致。

LCD splice screen without color difference


55-inch LCD splicing screen in use for a period of time will appear color attenuation, that is, color difference, affect the use effect. So, the understanding of a lot of people is liquid crystal splicing screen is more high-end, won't appear chromatic aberration. In fact, the color attenuation of LCD splicing screen will also occur after using for a period of time, and this attenuation is irreversible. However, its attenuation does not often occur. Generally, the manufacturer of LCD splicing screen will use technical means to adjust the color aberration before leaving the factory, so that the color aberration of a set of splicing screen can be basically consistent.

  液晶拼接屏可以不间断工作

  相关研究表明,液晶拼接屏连续满负荷工作96小时以上,就会加速其老化,严重时甚至会烧坏,因此,液晶拼接屏长时间工作很容易使某些像素点过热,一旦超过极限就会导致永久性的损害,因此,用户在长时间使用液晶拼接屏时,最好让其间歇性的休息一会,如果条件不允许,可尝试在不同时间间隔改变屏幕的显示内容,以便让屏体在等待工作状态时稍事调整。

  我们始终相信,在正确理解液晶拼接屏的误区后,无论在选购上还是在运用上,相信会给您带来一点收获!

The LCD splice screen can work continuously


Related research shows that the liquid crystal splicing screen working 96 hours continuously at full capacity, will accelerate the aging, serious when even will burn out, therefore, liquid crystal splicing screen for a long time work is very easy to make some pixels to overheat, once more than the limit, can cause permanent damage, therefore, the user when using liquid crystal splicing screen for a long time, it is better to let the intermittent rest for a while, if conditions don't allow, can try at different time intervals to change the screen display content, so that the screen a slight adjustment when wait for working status.


We always believe that, after correctly understanding the mistake of LCD splicing screen, whether in the purchase or in the use, I believe that you will bring a little harvest!


上一篇:没有了 下一篇:会议室应该如何选择多功能拼接屏(图文),开享受只能给您支招
返回顶部